Category Archives: Business

Meaning of Sealing Material and Food Grade Concrete Sealer

Concrete counter tops are stain prone and need high maintenance. The sealers have come a long way from the simple wax and acrylic sealers to most modern epoxy sealers. With the right sealer, you can have a stain-resistant, heat-resistant, scratch-resistant, Food Grade Concrete Sealer, easy to clean, easy to maintain and smooth counter top.

Bare concrete is porous and vulnerable to staining and chemical attack. Liquids will soak into the surface, carrying stains into the concrete itself. Acidic substances like vinegar and lemon juice will dissolve the cement paste.

Sealing material characteristics that are important to clients are:

• Enhance the appearance of the concrete without degrading the look or feel
• Non-porous
• Completely resist stains from food, oil, and other household substances
• Resist heat from hot pots and pans
• Resist UV degradation and yellowing from sunlight
• Scratch-proof
• Food Grade Concrete Sealer
• Easily cleaned using common household cleaning products
• Provide long term protection without the need for frequent maintenance
• Easy to repair& maintain

Sealing Materials: Sealers have two groups namely Penetrating sealers and Topical sealers.

Penetrating sealers come in the form of liquids that are applied to bare concrete, soak in, and then once wiped off and dried, are usually almost invisible.

• Densifiers are water-based chemicals that react with the cement paste in the concrete. The reaction generates cementing agents that increase the strength of the surface concrete and fill the pores. The cementing agents that are generated during hardening often serve to provide some color enhancement. Densifiers are often applied before repellents.

• Repellents are a concrete treatment that changes the surface tension characteristics of the concrete so that liquids bead up easily. They create a hydrophobic water-shedding effect when applied to the concrete.

Topical sealers make up the most of the sealers on the market as listed below:

• Wax is the most basic sealer. Generally, a high-quality floor wax that contains carnauba and beeswax, or just pure beeswax, is used. Automotive paste wax should not be used for sealing because of the additives it contains.

• Acrylic is a solvent based or water based, are the next most basic and common concrete sealers. Acrylic sealers are easy to use, available easily and relatively inexpensive. They are widely used for sealing floors and driveways, and provide modest protection. Acrylics generally provide heat resistance but are UV resistant.

• Epoxy is a two-component chemical system and you need to mix them to form the coat. The chemical reaction is irreversible, and the end result is a very durable, very hard surface. Epoxies are expensive chemicals and one need to follow a proper process to apply them. There are three basic types of epoxies: solvent based, water based and 100% solids. They are key to a Food Grade Concrete Sealer. They are widely used in industrial kitchens.

• Urethane are the type of sealers that has many of the Ideal Sealer characteristics. Some are a single part, and others are two part. Urethane, in general, are stain and heat resistant, provide good UV resistance, very tough and scratch resistant. They provide a glossy finish also.

Myself David Ryan, director of EP Floors Corp., a specialized Epoxy Flooring Company providing Food Grade Concrete Sealer service for commercial use. I am here to share my expertise and participate in discussion to flourish my knowledge here.

Business Aloe Vera Juice Factory

Aloe Vera juice comes with many benefits:

  • Aids in digestion and relieves occasional constipation
  • Increases alkalization and reduces acidity in the body
  • Encourages normal stomach lining
  • Reduces acid and stomach ache
  • Supports learning, memory, and mood

How to get the most from aloe Vera juice

For you to get the most from the juice you need to do a number of things that include:

Take the juice on an empty stomach: To optimize the functioning of the juice you should take it on an empty stomach. The best way of going about it is taking the juice when you wake up and when you get home in the evening. To increase the rate of digestion, experts recommend that you avoid hot foods and drinks one hour after taking the juice. You will even be better off if you could avoid taking the food at all.

Pay attention to the dosage: To get fast results, many people go for a high dosage. This shouldn’t be you. When you are just starting taking the juice you should start on small doses and then increase the dosage over a period of time. As rule of thumb, you should avoid taking too much of it thus putting your life at risk.

Give the juice time to work: We are living in a world where people want instant gratification. Many people want to do something today and see the results tomorrow. It doesn’t work this way even when you are taking aloe Vera juice. You should note that the juice isn’t an overnight cure-it will take time for it to work. Experts recommend that you give the juice up to 3 months for it to work. During this time you should avoid smoking or eating unhealthily.

Store the juice properly: How you store the juice determines how long it will last and how effective it will be. You should store it open in your fridge for up to 3 months. If you don’t have a refrigerator, store the juice closed at room temperature. You should pay close attention to the expiration date of the juice to avoid side effects.

Be on the lookout for the “detox” effect: When you are taking aloe Vera, it’s common to have headaches, rashes, and even diarrhea. These effects are common when you are taking high doses of the juice. When you experience the effects you should lower the dosage for a few days.

How to get aloe Vera juice

There are two main ways in which you can get the juice: buying it and making your own. You can buy the juice while it’s already made or buy aloe Vera leaves. You can also go to the garden and get your own leaves. When getting the leaves, you should use a sharp knife. This is to ensure that you get a clean cut that won’t damage the leaf.

It’s almost impossible to take the juice on its own-you should make it palatable by adding fresh lemon, orange juice, lime, or any other of your favorite fruits.

Information About Fiber Optic Cable Cleaning

To get rid of contaminants and keep your optic cable functioning optimally you have to clean it regularly.

Tools you need for cleaning

There are many types of tools you need when cleaning the cables. Some of these things include:

Compressed air: Clean dry air is necessary to ensure that the aerosol is free or water, dust, and oil. For ideal results, you should use filtered or canned compressed air. You can easily find the air in your local laboratory supplier or photoshop.

Lens paper: The lens paper is made up of a long fiber that doesn’t have any chemicals. The paper is ideal when you are looking to minimize particulates. You can easily find the lens paper from your local drug store, laboratory supplier, or camera shop.

Methanol: You are discouraged from cleaning the optic cables using chemicals but if you have to, you should go ahead and do it but you should follow the guidelines given by your manufacturer. Just like the other cleaning materials, you can easily find methanol from your local camera shop, pharmacy, or drugstore.

Fiber optic cleaning notes

For ideal results when cleaning the unit you need to observe a number of notes. When cleaning, you should ensure that the fiber optic cable doesn’t come into contact with any surface, including your fingers. You should also avoid bending the cable. This is to avoid breaking the cable which would result in poor performance.

It’s common for optics and optic coating to be easily chipped. To prevent the chips from getting onto your hands you should use finger cots or powder free surgical gloves. To avoid contamination you should only use fresh spectroscopic grade methanol. Before you start the cleaning process, always ensure that the module power is off and the light sources are disabled.

Fiber optic cable cleaning procedure

To achieve ideal results, you should follow a cleaning procedure. You should start with blowing the surface of the fiber optic cable with a stream of clean dry air. This is to dislodge any large, loose particles. You should then place 1-3 drops of methanol at the center of the lens tissue and use it to clean the optical surface. Once you are done examine the optic fiber under high-intensity light using a magnifier. If there are still some contaminants on the surface you should repeat the cleaning process. If clean, immediately install a protective cover.

This Swift Facing Criticism From Bitcoin Remittance Companies

One of the widely known mediums for financial transaction messaging called Swift has been facing criticism for not being able to fulfill the needs of financial markets around the world. There are some who believe that it has turned out to be inefficient for settling cross-border payments for not being able to manage real-time settlement of any transaction amount and not being transparent in payment status and settlement risk.

Global Payments Innovation – A New Initiative

In response to such criticism, Swift has launched Global Payments Innovation (‘GPI’), which has the ability to make funds available on the same day for B2B transfers that fall in the same time zone. It also offers secure remittance information, end to end payment tracking, and better transparency. The first phase of the project was made live in January this year and is currently in use by twelve banks, including ING, ‘Danske’ Bank, ‘Citi’, and Bank of China. It is currently focusing on B2B payments. Swift has made another commitment to expanding its cross border payment system.

The effort of improving global messaging service might be too small or too late in terms of resolving worldwide payment clearance, payment and settlement blockage, especially for customers from the non-banking sector.

‘Bitcoin’ Remittance Companies

Both new and old ‘bitcoin’ remitters are already working on resolving these issues. They use different ‘blockchains’ to transfer money around the world. Align Commerce is one of the ‘bitcoin’ remittance companies that became famous for $20.25 million in funding. ‘Marwan Forzley’, CEO of Align Commerce, considers distributed ledgers and ‘blockchain’ to be next generation opportunity.

Cross Border Payments in the Global Finance Chain

These payments were around $26 trillion in 2014, which is around 33 percent of the world’s GDP. Due to inconsistent and non-standardized infrastructure, the money will stay trapped in today’s system. For sending payment across the border, a customer has to find a transmitter for managing money transfer. The transmitter will be able to transfer payment due to its contacts with financial institutions in both home and recipient countries. Furthermore, each institution has its own intermediary, which adds more to the complexity of the process. Every bank, involved in managing the transfer, charges its own service fee and it can take 7 days for a process to complete.

The corporate sector around the world was estimated to be $15.7 trillion in 2014. They can negotiate fees between 1 to 2 percent of the payment amount. Whereas, small and medium size companies; and person to person transactions can be charged up to 15%. The hidden cost of these transactions makes it harder for customers who cannot afford it.

If a customer belongs to a ‘underbanked’ or undeserved part of the world, he may not be able to find those paths that may enable simplified cross border payments, for example, taking the services of a transnational bank for payment transfer by using their infrastructure.

Efforts made by ‘Bitcoin’ Remittance Companies

Although, Swift is committed to bringing transparency in cross border payments through ‘GPI’, yet, it failed to provide relief when it comes to customers who cannot negotiate fees. On the other hand, ‘bitcoin’ remittance companies have made efforts to resolve this issue at a small-scale. These companies enable customers to execute borderless transactions at a low and well-controlled cost.

One of the largest ‘bitcoin’ remittance firms called ‘Bitspark’ is based in Hong Kong. The company believes that it has the best long-term prospects despite the lack of traction. The CEO of the company, ‘George Harrap’, said,

The vast majority of the world’s remittances are not done via banks, but by cash money transfer shops. This will not affect how they manage their business or transactions. Cost will remain the same as remittance companies batch payments anyway, so potentially, reductions in wire fees do not affect companies who transfer $10m per transfer and draw down on this balance for small remits.

The Problem Persists

Despite Swift’s intention of improving payment transaction recording for its member institutions around the globe, it is possible that innovations inspired by ‘GPI’ may show up in other ‘blockchain’ enabled applications. For instance, ‘HyperLedger’ Project (a project in which Swift is a member) might develop the basis for cross border frameworks in future.

The CEO of ‘ZipZap’, ‘Alan Safahi’, managed to raise $1.1 million in 2014 for expanding its cash to ‘bitcoin’ service. According to him,

“‘ZipZap’ uses a combination of traditional (Swift) bank payment rails and ‘blockchain’ technologies to find the least expensive and most efficient transfer option. The Swift ‘GPI’ is primarily for B2B payments, so it will not impact ‘ZipZap’s’ current business flow.

It is mentioned in the Ripple that launching ‘GPI’ was more of a step toward staying relevant rather than a step toward modernization.

coinbanks platform is a leading crypto currencies trading platform which provides complete insight and global changes associated with Bitcoin currency.

The Complaint Free Challenge For Your Business

When you don’t like something, what do you do?

Most people complain about it. According to research, most people complain once a minute during a typical conversation.

Shocking, right? It was to me.

It’s so socially acceptable to complain that it may not even strike you as strange in the moment.

You may not feel its effects, because you’re so used to it.

That doesn’t mean it doesn’t affect you.

The truth? Complaining is so toxic!

Complaining rewires your brain for negativity.

It can even make you sick. The extra cortisol released by frequent complaining impairs your immune system and make you more susceptible to high cholesterol, heart disease, obesity, diabetes, and brain strokes.

Also, because we’re social beings, we naturally are affected by the moods of those around us. It’s called neuronal mirroring. Complaining is like smoking: you don’t have to do it yourself to suffer the negative effects.

Just as bad, every time you complain, you are putting yourself in the role of victim.

Playing the victim is bad for your business.

Woah, I’m not a victim, you might say! I’m just letting off steam!

That, my dear friends, is what is called an excuse. You don’t need to complain to let off steam. You can exercise. You can ask for advice and even empathy. You can talk about solutions, after you describe the situation.

So why do we complain?

The fact is, it’s easier to complain than it is to feel the problem and open to solutions. It gives you a little short-term relief.

And it’s a habit. For many of us, complaining is a learned coping mechanism we bring from childhood.

Complaining is a negative energy that interferes with you having the successful business that you can have. It interferes with your impact. It doesn’t change anything.

So I’m challenging you! For the next 30 days, commit to living complaint free.

Your energy will get a boost. Your business will benefit. Your clients and team may comment on the difference in your presence. You’ll see more possibilities. You’ll be more creative. You’ll feel more satisfied. You’ll be EMPOWERED.

During the challenge, if a complaint slips out, it’s OK! This is like any habit – you’ll need time to make the transition.

You as a business owner need to feel a sense of agency, a belief that your decisions have an effect. You need to be empowered.

Living complaint free is a great way to empower yourself. You’ll be surprised at the positive changes that ripple out.

Even if you’re not completely convinced, consider the evidence. Then try it as an experiment in improving your well-being.

Why 30 days? Complaining is a habit. To replace it with something better, you’ll need to do it 30 days in a row.

You can do this! When I first did it, it took me a few tries, but eventually I made it all the way through. And life was never the same.

I’ve needed a few repeats since then! And you may too – that’s all OK!

Ways To Uphold Efficient Business Growth And Expansion

In today’s competitive business realm, all enterprises must aim for growth and expansion. If a certain business won’t work toward these 2 objectives, it is basically setting itself up for a failure.

Experts highly emphasized that business growth and expansion can successfully be achieved through following time-tested success principles. Such principles will create focus for all your efforts toward growth. Also, they uphold excellent standards for each activity performed toward the goal. Thus, if you are preparing your business for growth and expansion, it is very crucial for you to be aware of the success principles you must uphold.

4 Essential Principles Every Corporation Today Must Uphold

Innovation is a must. Your business must fully understand the needs of your target clients. It should work toward efficiently meeting such needs. Innovation refers to coming up with something that is new and great from something that is already great so you can be able to deliver the best value to end users. This further means that your business must always find time to study meticulously the journey of your target customers so you successfully innovate.

Always be inspired. Most successful individuals say that inspired efforts don’t deplete energy. Instead, they are very invigorating. Moreover, inspiration allows your organization to use your drawbacks to aim for victory. Hence, be always inspired as you are working to expand your venture due to the fact that a joyful process won’t fail to yield the best outcomes.

Timing is very crucial. When it comes to growth and expansion, you cannot be late or early. Bear in mind that plenty of great opportunities are just accessible for a limited amount of time. Also, pre-empting things will spoil their potential. Hence, you must take action at the most ideal time. This will involve the need to study provisions meticulously, to get help from consultants, and to know the different financing solutions that your business can efficiently use.

Expect sacrifices. There will always be sacrifices that must be made if you are aiming for better and bigger things. Indeed, sacrifices are inevitable. And this can mean longer work hours and avoiding some pleasures and physical comforts for a specific period of time or perhaps saving on a couple of things so that your resources can be allocated to more significant aspects of operations.

All of these principles will allow you to properly manage your venture. Consider implementing all of these properly. Surely, you will find your enterprise increasing steadily toward your goal of becoming successful in today’s competitive market arena.

The 6 Ways to Prepare for an Outdoor Event Catering

An outdoor event may be a scary thing for caterers. It requires experience and needs a detailed plan for you to be able to execute it perfectly. Here are some of the important things that caterers should consider if they are already booked for an outdoor event:

  1. Budget. The first important thing to know is the allotted budget of your client. You and your client must establish a realistic budget, so you can provide a food menu that will be sufficient to the number of guests, and let them taste a flavourful food on their table. You have to explain to them the limitations of their budget and what to expect during the outdoor event.
  2. Location. Know the location of the event. This will determine if you can provide an on-sit-down, live station catering, or a buffet type of catering. Knowing the location is important for you to prepare your needed food and equipment ahead of time. It is essential because you need to know how far this location will be to prevent food spoilage and hassle to travel.
  3. Catering Equipment. Make sure to bring sufficient plates, serving dishes, and glassware. This will help you save time and prevent the hassle. As a caterer, it is important to know the available catering equipment in the location of the event. Check if you still need to bring your own fridge or if the event place can let you use their own. If you need to bring your own gas and electric equipment, and other needed catering equipment, it is advisable to contact and hire a one-off event supplier.
  4. Food Safety. Expect that you need to secure the food safety twice the needed security in indoor. This kind of event requires you to be more particular to the right temperatures of your food. Make sure you have enough fridge to keep the cold food and enough ventilation for outside cooking.
  5. Time Plan. It is advisable to create your time plan to manage your schedule properly. This will provide you with a list of things that you need to prepare ahead of time. A time plan is a useful tool for you to make things in order. Write everything you need to accomplish and cross them out when you already completed them. A realistic and detailed plan will lessen your stress and help you manage catering easier.
  6. Staff. Getting the right staff for an outdoor event catering is another thing to prepare. If you think that you have enough full-time staff for your catering, then hire some extra staff. But, make sure that these additional people and staff are trained to do things efficiently. You can make a good impression to your client by showing that you are all professionals in this business.

Good Methods to Attract Some Clientele

The whole idea behind using sports promotional merchandise, of course, is to get people interested. You want to give them enough information that will lead them in the right direction, which means, in a way, that they’ll want to act after having had a taste of the appetiser, so to speak.

Generally speaking you want the client to understand what business you’re in. He must know you’re about sports and physical activity. It therefore makes sense to attract their attention by using the correct sports promotional merchandise that will talk to them, that will promote the specific sport or sports they’re about.

It makes perfect sense to get their attention by handing or sending them something that applies to the specific activity, game or sport. Often kids like to ”show off” in front of their mates, and that may actually help to spread your message. The mates will be interested too! And that means more business. One of the best methods remains giving something that they can talk about.

You don’t have to get them interested by spending a fortune on individual items. The idea behind sports promotional merchandise is to get the public talking, not necessarily the monetary worth of the gift. Very often something cheaper, but catchy, may bring better results in the long run. Something small that they see all the time, something they can take with them everywhere without having to worry about how expensive it is, will often do it.

A good idea to get your message across is to get in touch with schools in the area. Hand out as much as you can. Those kids tell their friends and family and before you know it, enquiries start coming in. The same goes for sports clubs where members are mainly adults. Just think about it: The local soccer club, netball club – hockey, you name it – could be the next stop for your sports promotional merchandise to be handed out at.

A wonderful idea is to get involved in a club’s activity when, for instance, they organise an open day, or a day when parents are allowed to bring their kids with to the club. Hand out some items to the kids on those occasions. Befriend not only parents but their families too because that is where you want to concentrate your efforts after the initial introduction.

Open days at schools or sports clubs create the ideal opportunity to distribute your sports promotional merchandise. Think of it as a captured audience. You have lots of feet, you can create excitement and ask for an opportunity to speak – a few minutes may be all you need – to those present. Make the most of these free opportunities.

A lot depends on the specific sport that the client is interested in. If, for instance, they like tennis, samples of T-shirts with company logos will be a great idea. The same goes for other apparel such as baseball caps, wrist bands, racket covers and the like. Items you would hand to members – or their friends – at a rugby club may be tog bags, water bottles with logos or even a face towel with the company’s emblem. If you really want to spend the extra bit, try a bigger towel.

Sports promotional merchandise is a great marketing tool. People everywhere are the same. They want to believe that other people are interested in them. And when we talk about sports lovers, they’re no different from anybody else. Once you give them something to remember you by, chances are they will come back later. And that is exactly what you want. You want them to remember your brand; you want their business.

Whatever it is that you’re looking for, here at Brandz Ltd we’re ready to assist. We come with great experience and are known for the quality of our work. As a company that takes on assignments from virtually all corners of the world we make it our business to listen to our clients and their requirements so that we are in a position to deliver to our clients exactly what they want. We pride ourselves in creating custom made products for the people we deal with. We are proud to say that we have a happy client base and that we are ready to assist you too.

This Many Features of Bolts Mentioned by SS Bolt Manufacturers

The bolts are an important part of manufacturing. There is a wide range of applications of these in both the industrial and commercial sectors. That can be used in anything, from the gardening tools to the airliners. There is a complex combination of the design and the mechanical properties which make the function in a proper manner.

But do you know how to determine the utility of an SS bolt? Well, it is not exactly determined by the fitting in the holes of the bolt. It can be simply determined by a series of particular specifications. These are the type of bolt, the physical dimensions of it, the density of the thread, the forming material, and the tightening materials are all crucial for the installation of the bolts. The linkage of the nuts and bolts can be a cause of a significant influence over the product efficiently and the component assembly.

A bolt that is long may be difficult to use for operating purposes mentions reputed SS bolt manufacturers. If the tensile strength is less, then it will tend to break down easily. Thus, if one understands the basics to work with a bolt can then differentiate between a good and a bad project.

The Bolt Threads

SS bolt manufacturers mark the main characteristics of the bolt are the bolt threads. The thread works more like an inclined plane. It is spiraled around the length of the fastener. The rotational pressure for the spiral is necessary for the slot. When the bolt is turned, it causes the bolt to move in a complementary slot that is against the inclined plane towards the upper direction. The greater the torque that greater is the pressure to pull the thread forward. This causes the tension to occur in the bolts. It also causes a clamping force that presses the nuts in the forward direction. The greater the arrangement of the threads the more will be the strength of the joints. The thread strength improves if they are heat-treated.

The Mechanical Forces

To tighten a bolt, different types of mechanical forces are necessary. This helps the joints to remain secure. The crucial forces for the bolt installation are as follows:

SheerForce-It is a transverse pressure that works against bolts in the perpendicular direction. It can be present in a combo along with tension.

Clamping Force-The SS bolt manufacturers say that this is a compression that is applied to the bolts. This helps in holding the components together.

Pre loading Force-The preload force keeps the thread in place. This helps the thread stretch and engage.

Tension Force-This force applies to the bolt length. This provides pressure in the vertical dimension rather than the width of the bolt.

There are several varieties of the SS bolts. They can be manufactured using a wide range of materials. Among them, steel is the most prominent one. This is because steel has a higher strength. The stainless steel varieties are much more comprehensive in use because they do not give rise to rust or corrosion and lasts a longer time. The SS bolt manufacturers assure that if they are buying these products, they are going to be benefitted much out of them.

If you are looking for Industrial Fasteners Manufacturers, then Nut Bolt Wala is one stop destination for all your requirements.We Deal in all types of Fasteners which are used in Industries and Factory.

Some Common Mistakes For Avoid While Choosing Bolt Manufacturers

To mechanically joint or affix two or more objects together, there are many industries that uses hardware device called fasteners. The wide range of the fasteners includes bolts, nuts, washers, anchors, screw and many more made with high quality materials. The fasteners are used widely in different industries and various other applications. Choosing a reliable and committed bolt manufacturer is utterly important, as bolts are not only a type of fastener that joins two things together but also have to bear lot of tension, which requires it to be strong for bearing great load. Differentiating the featherweight and light quality materials for the heavy-duty purpose is the main cause of application failure.

The demand for the high quality bolts is increasing rapidly with the evolving technologies and resources. The industries are precisely focused on the appearance and the quality of the bolts as they are used in veteran applications in all the industries from chemical to aerospace. In hurry, most buyers commit common mistakes while choosing the bolt manufacturers, which cost enough to burn a hole in their pocket while underrating the utilization of the bolts.

Sins Committed By The Buyers While Choosing Bolt Manufacturers:-

Neglect The Roots Of The Manufacturer – A manufacturer with a dearth of knowledge in manufacturing even in the array of serving different types of fasteners. The buyers from various industries focus on the variety they want to purchase suiting the application of their industry. Buyers paying attention on their current requirements while ignoring future one is the most common mistake that cost them higher than they think.

Underestimating The Power Of Quality Control – Quality control is the final but important stage of any manufacturing that ensures the flawless product quality. Ignoring such significant step affect the choice of said to be quality fasteners. They simply rely on what they are buying from generations from same manufacturer without paying heed to the modern designs and technology.

Ignoring The Extent Of The Manufacturer – A well-grounded manufacturer always concentrate on the quantity of the fasteners required by the industrial applications. Most buyers close the eyes to the emergency needs or future expansion, which actually takes time of reaching the extent of the manufacturer.

Overlooking Market Price Fluctuations – Price is the most crucial determinant that influences the choice of the bolts for your industrial application. When dealing with the traditional manufacturers from ages, the buyers skip the step of exploring the market for price and designs. Skipping this important step might ends you in buying outdated technology products for a great price.